Products
Indoor Ring Main Switchgear

Indoor Ring Main Switchgear

Rated voltage: 12 kV
Rated current: 630 A (XGN15-12 F) / 125 A (XGN15-12 F.R)
Breaking capacity: 630 A closed-loop breaking (F); 31.5 kA short-circuit breaking (F.R)
Standards: GB3906, IEC298
Structure: Box-type, fixed-type, metal-enclosed

Product Overview

 

 

1

 

The XGN15-12 is an indoor ring main switchgear for 12 kV power systems. It receives power from a ring network or from dual radial feeders, then switches, protects and distributes it to downstream users. It can also serve as a terminal supply point and is compact enough to be installed inside compact box-type substations.

 

It belongs to Gangheng's High Voltage Switchgear range. It comes in two types: F (with load switch) and F.R (with load switch–fuse combination unit).

 

Every unit is built at Gangheng's production base in Jiangshan, Zhejiang, on a site of 5,000–20,000 m². The factory uses CNC punching machines, CNC bending machines, laser cutting machines and copper busbar bending machines, and all units go through in-house testing.

2

Technical Parameters

 

 

The table below gives the rated data for the XGN15-12 indoor ring main switchgear.

 

Item Unit XGN15-12 (F) XGN15-12 (F.R)
Rated voltage kV 12 12
1-min power-frequency withstand voltage kV 42 phase-to-earth and phase-to-phase; 48 across isolating distance same
Lightning impulse withstand voltage kV 75 phase-to-earth and phase-to-phase; 85 across isolating distance same
Rated frequency Hz 50 50
Main busbar rated current A 630 630
Rated current A 630 125
Rated closed-loop breaking current A 630 -
Rated active-load breaking current A 630 -
Rated cable-charging breaking current A 10 -
Rated transfer current A - 1700
No-load transformer breaking capacity kVA 1600 -
Rated making current (peak) kA 50 -
Rated short-time withstand current (4 s) kA 20 -
Rated peak withstand current kA 50 -
Rated short-circuit breaking current kA - 31.5
Earthing circuit peak withstand current kA 50 -
Earthing circuit short-time withstand current (4 s) kA 20 -
Fuse type - - S□LAJ
Auxiliary circuit rated voltage V AC/DC 220, 110 AC/DC 220, 110
Degree of protection - IP3X IP3X
Mechanical life operations 2000 2000
Enclosure material - Hot-dip galvanized thin steel sheet or aluminum-zinc coated sheet, CNC-machined, assembled with high-strength steel rivets same
Surface treatment - Powder coating; standard color grey; custom colors on request with a color card same
Cabinet width mm 375 / 500 / 625 / 750 (depending on scheme) same
Cabinet depth × height mm 860 × 1600 same
Applicable standards - GB3906, IEC298 same

 

Service conditions: ambient temperature −15 °C to +40 °C; altitude not exceeding 1000 m; relative humidity: daily average ≤ 95 %, monthly average ≤ 90 % (at +20 °C); no corrosive or combustible gases and no significant water-vapor pollution; no frequent shaking.

 

Note: IEC 62271-200 is the current standard for AC metal-enclosed switchgear and controlgear and has replaced IEC298.

 

Structural Features

 

 

product-636-573

  • The frame is made from galvanized or aluminum-zinc coated steel sheet, CNC-machined and riveted. This gives high precision, strength, corrosion resistance and good ventilation.
  • The FLN36-12D SF6 load switch and combination unit are compact and reliable, with a long service life, and can be made maintenance-free.
  • The five-prevention interlock is reliable and meets the "five-prevention" requirements.
  • The earthing protection system is dependable. Pressure-relief channels at the rear and top of the cabinet protect personnel.

 

 

Cabinet Configuration

 

 

The XGN15-12 is supplied as a set of function cabinets that you combine into a ring main system, not as a single fixed product. The brochure defines 15 main-circuit schemes. Cabinet width changes with the scheme: 375 mm for 001, 005, 009, 010, 011 and 012; 500 mm for 002–004; 625 mm for 006–008; 750 mm for 013–015.

 

Function Schemes Typical content
Cable in/out 001–004 FLN36-12D load switch; options add LZZJ-12 current transformers and HY5WZS-17/50 surge arresters
Cable outgoing (fuse combination) 005–008 FLRN36-12 load switch–fuse unit with S□LAJ fuses; options add current transformers and surge arresters
Cable incoming 009, 015 009 is a plain incoming cabinet; 015 adds metering transformers
Bus tie, left or right 010, 011, 012 010 plain tie; 011 with FLN36-12D load switch; 012 with FLRN36-12 fuse unit
HV metering 013, 014 Voltage and current transformers for high-voltage metering

 

Customization

 

 

product-1200-675

We support custom configurations. Send us the transformer capacity and site drawings, and we design a matching scheme. If you cannot provide these parameters, tell us the site, the equipment load on site and the functions you need, and our engineering team will propose a solution. Customized and standard configurations are usually priced the same, though cabinet width may increase depending on the configuration. There is no minimum order quantity, and a single unit can be delivered.

 

When ordering, please provide:

  1. The main circuit wiring scheme
  2. The layout plan of the switchgear installation
  3. Auxiliary and control circuit schematics (if required)
  4. Any other special requirements in writing

 

Applications

 

 

Our switchgear serves these sectors. Each unit is configured to the voltage and scheme the site needs.

 

  • Power systems: generation, transmission and distribution
  • Power plants and substations: ring and radial supply points
  • Petrochemical industry: plant power distribution
  • Metallurgy and steel industry: production-line distribution
  • Light industry and textiles: factory distribution
  • Factories and mines: site distribution; as an XGN15-12 indoor ring main switchgear it fits compact substations on site
  • Residential areas and high-rise buildings: building power distribution

 

Quality Certifications

 

 

ISO9001: quality management system

CCC: China Compulsory Certification

Type test report: available on request

Patents: 5 utility-model patents

State Grid: our products are listed on the State Grid e-commerce procurement platform, and Gangheng is a qualified supplier to State Grid and China Southern Power Grid.

product-552-690

 

 

 

Manufacturing & Quality Control

 

 

Gangheng was founded in 2004 and has more than two decades in power distribution equipment. Our base is in Jiangshan, Zhejiang, a transport hub linking Zhejiang, Fujian, Jiangxi and Anhui. It is under 3 km from the Quzhou South exit of the G3 Beijing–Taipei Expressway and under 7 km from Jiangshan railway station, with National Highway 205 and the Zhejiang–Jiangxi railway running through.

 

  • Key equipment: CNC punching machines, CNC bending machines, laser cutting machines, copper busbar bending machines and testing equipment.
  • Scale: a 5,000–20,000 m² plant.

product-1000-667

 

Delivery & Trade Terms

 

 

Term Details
Minimum order None; single-unit orders accepted
Lead time About 30 days for an order of around USD 300,000; 45 days for around USD 700,000; 60 days for around USD 1,500,000
Equipment condition All delivered equipment is brand new and unused

 

Warranty & After-Sales Service

 

 

product-2400-1600
  • 12-month free warranty after acceptance.
  • 5 years of hidden-defect protection after the warranty ends.
  • 24/7 on-site support, with spare parts priced no higher than the market price.
  • Professional technical documents and training.
  • Quality inspection during installation and commissioning, with responsive handling of defects or missing parts.

 

 

 

Frequently Asked Questions

 

 

Q1: What voltage and current range does the XGN15-12 indoor ring main switchgear cover?

It is rated 12 kV, 50 Hz, with a 630 A main busbar. The F type is rated 630 A and the F.R type 125 A.

Q2: Can the XGN15-12 be customized to my transformer or site data?

Yes. Send the transformer capacity and drawings, or the site, load and function requirements, and our engineers will propose a scheme. Cabinet width may increase.

Q3: Which standards does it comply with?

It complies with GB3906 and IEC298. If your project needs another standard, send us the requirement and we will confirm it.

Q4: Is there a minimum order quantity?

No. We deliver orders from a single unit.

Q5: What is the delivery time?

It depends on order size: about 30 days for around USD 300,000, 45 days for around USD 700,000, and 60 days for around USD 1,500,000.

Q6: What does the warranty cover, and what happens after it ends?

Free warranty for 12 months after acceptance, then 5 years of hidden-defect protection.

Q7: Can the XGN15-12 be exported?

Yes. We supply overseas customers; contact us with your destination and project details.

 

Hot Tags: indoor ring main switchgear, China indoor ring main switchgear manufacturers, suppliers, factory, 10kV intelligent switching station, 11kv switchboard, enclosed switchgear, switchgear arc, switchgear breaker, switchgear grounding

Send Inquiry